OneConnect Parameters

TotalviewOneConnect connectors connect to the Uni-tel One-Connect system and monitors devices as well as sending device, group and call control commands to the system.
The TotalviewOneConnect connector connects to One-Connect using the One-Connect CSTA server.

For the TotalviewOneConnect connector to be able to communicate with One-Connect, a user with the roles “Omstillingsbord” and “Tillad Administration” must be created on One-Connect.

Also the PBX setting “Håndfri Kaldhåndtering” must be checked and the TotalviewOneConnect machine IP address must be added to the “Netblokke” section with API access enabled.

Server address

Address of the One-Connect CSTA server.

Default is csta.one-connect.dk

Port

The One-Connect CSTA server port. Default is 7001

One-Connect user

Username of the user with the role “Omstillingsbord”

Password

Password for the One-Connect user

PBX-Domain

The pbx-domain of the customer in the format number.pbx.one-connect.dk

International prefix

Usually 00. For example 0045xxxx Denmark and 00298xxxx Faroe Islands.

International code

Country code. For example 45 for Denmark and 298 for Faroe Islands

Local start/end

Fill in the first and last local number in the connected One-Connect system. All numbers that are not in the interval are treated as external numbers

Behavior configuration

Group filter

Add a filter to only see groups of interest. If empty then no filtering is added.

It’s possible to add an interval of group id’s or individual id’s, e.g. 4000,4010-4020

Other settings

  • If using the Uni-tel softphone, the “Accepter automatisk besvarelse” must be enabled on the phone